Page | 32
The MP tab controls the enhanced MultiPhase™ feature. This is the exciting feature that allows shifting between
the fonts while the saber is running, switching the hums and colors! This allows every blade color and hum to be
used with every other font’s effects, allowing the broadest range of sounds and colors on any saber board.
Figure 24 – MultiPhase™ settings shown in the MP tab. Note that mpType, mpDir, and mpHum are global settings and will be the same for
every font.
MPTYPE
sets what type of sound is used when doing the MultiPhase™ action into the next/previous font.
multi.wav
will use the mult.wav from the font that the transition is going into; DP will use the
dualANN.wav
sound
for the font that is being exited.
MPLEN
sets the length of the blade effect transition in milliseconds. Similar to the DualPhase™ length, setting to
zero will allow the length to be determined from the multi wav sound.
MPOSET
allows the hum to stop playing for a short period, allowing for the multi sound to be more pronounced.
This is a reverse offset like the
HUMSTART
variable.
4.5.11.
ADVANCED
The Advanced tab is used to help adjust the mix of colors for an LED, specifically for LEDs like the X4 where one
color is doubled up. For these LEDs where one color is stronger than the others, they may cause separation during
the retraction effect. To fix this, use these sliders.
