Page | 28
Figure 20 – The Blast tab contains color settings and blade effect settings for the Blaster Block feature.
4.5.6.
AUDIO
The audio tab has some settings related to the audio and audio related features.
Saber Cinema™ can be enabled on a per-font basis from this tab. Make sure to have at least one
trckNN.wav
file
when using this feature.
Linear mode can be selected here for both the hum/in/out effect and for the actions (it can be set for the FX
feature in the FX tab). Setting to linear means that each type of sound is played in numerical order, as opposed to
being randomly selected each time. Enabling allows for great demoing ability of the sound font, and ensures that a
different hum will be selected each time if enabled for them.
HUMSTART
sets the time when the hum will start mixing in with the outNN.wav sound, as a reverse offset in
milliseconds. For instance, if the
outNN.wav
being played is 2 seconds long and humStart is set to 500ms, then the
hum will start mixing in at 1500 milliseconds, which is 500ms before the end of the out wav sound. This allows for
a consistent experience with varying length out sounds.
The two volume settings are pretty straight-forward. Higher settings will make louder volumes. Now the values are
in true 1/16 increments, allowing perfect fine-tuning for any speaker. Recommended is 15 for effects and 8 for the
hum, but it’s dependent on the speaker.
