Page | 10
Figure 3 – Basic wiring for Igniter 3™. This will drive a single main LED and would require a removable battery for charging. Note that a
resistor between the blue wire and C1- of TruDrive™ would be needed if the LED is red, amber, or red-orange.
3.2.
RGB WIRING
The preferred setup of Igniter 3™ is to use an RGB LED. This allows the use of all the popular Igniter™ specific
features, such as separate colors for clash/lockup and blaster, ClashShade™, BlastShade™, and BladeShade™, and
the popular feature Saber Dual Phase™, among many others.
The recommended LED to use with this setup is the NECree RGB LED that is sold right from our store! This LED was
specifically designed to have the brightest possible colors throughout the entire color range, producing the most
even blade possible from an in-hilt LED.
http://saberigniter.com/NECreeRGB.aspx
The following diagram shows the NECree RGB wiring
