Myson iVector S2, Руководство по установке

Страница: 36 / 40

36
iVector S2
Installation manual
iVector S2 • 2022-07-01
US
8.8 Automatic operation
Key Operation Display
Press and hold the AUTO key. The function being activated is indicated by the
relevant symbol appearing on the display.
Fan speed adjustment is carried out automatically
between the minimum and maximum values, according to the difference between room
temperature and set temperature.
8.9 Silent operation
Key Operation Display
Press and hold the Silent key. The function being activated is indicated by the
relevant symbol appearing on the display.
Fan speed is limited to a set maximum value.
8.10 Night-time operation
Key Operation Display
Press and hold the Night-time operation key. The function being activated is
indicated by the relevant symbol appearing on the display.
By selecting this mode, fan speed is limited to
a set level and the set temperature is adjusted
automatically, as follows: • decreases by 1°C after one hour and by another
degree after two hours in heating mode
• increases by 1°C after one hour and by another
degree after two hours in cooling mode
8.11 Operation at maximum fan speed
Do not use for extended periods. Can cause motor damage.
Key Operation Display
Press and hold the Max Operation key. The function being activated is
indicated by the relevant symbol appearing on the display.
In this operation mode, the maximum possible power
level is activated whether heating or cooling. Once the desired room temperature is reached, we
recommend selecting one of the other 3 operation
modes for increased comfort and sound levels.
8.12 Key lock
Key Operation Display
By pressing both the + and - keys for 3 seconds, all keys are locked locally,
and this is indicated by "bL" appearing on the display.
All actions are disabled to the user and whenever any key is pressed, "LOC"
will appear. To unlock the keys, repeat the sequence.
8.13 Reduce brightness to minimum
After 20 seconds from the last action, the panel
brightness will be reduced for improved night-time
comfort, and the room temperature will appear on the display. If the brightness is still disturbing, the
display can be switched off completely.
Key Operation Display
With the display off, press and hold the + key for 5 seconds
until "01" is displayed.
Use the - key to change the value to 00 and wait 20 seconds
to check the setting has been accepted.