Myson iVector S2, Руководство по установке

Страница: 3 / 40

3
iVector S2
Installation manual
iVector S2 • 2022-07-01
US
Installation manual
iVector S2 – VS and VSI models
We want to thank you for choosing one of our products. We are confident that you will be
happy with your selection because it represents the state of the art in the technology of
climate control. By following the suggestions contained in this manual, the product you have
purchased will operate without problems giving you optimum room temperatures with
minimum energy costs.
This unit complies with North America Standards:
• UL1995
• CSA C22.2 No. 236-15
CONFORMITY
The following symbols provide the necessary guidance for correct, safe use of this product.
SYMBOLS
Safety pictograms
These symbols may appear in the manual or on the product
WARNING / CAUTION HOT SURFACE
Signals that an appropriate safety instruction
should be followed or caution to a potential
hazard. Signals that the parts of the product could be
hot and should not be touched without great
care.
DANGEROUS VOLTAGES PROTECTIVE EARTH
Indicates hazards arising from dangerous
voltages. Identifies any terminal intended for connection
to an external conductor for protection against
electric shock in case of a fault, or the terminal
of a protective earth electrode.
HEAVY REFER TO MANUAL
Indicates that this product is heavy, and provision
should be made for safe lifting and handling. Refer to relevant instructions within the product
manual.
The iVector S2 is available with casing (VS model) or
without casing (VSI model), in 5 different lengths.
VS models
can be mounted vertically on the wall or
horizontally on the ceiling, with the option for integral
controls (not ceiling), remote mounted controls or 0-10V
option with BMS input or 0-10V remote control input.
All units are available in 2 or 4 pipe options, and all units
are supplied with pre-fitted valves.
VSI models
can be mounted vertically (recessed wall
mounting) or horizontally (recessed ceiling mounted), with
the option for remote mounted control or 0-10V option
with BMS input or 0-10V remote control input.