Mylex ML466, Инструкция по установке и эксплуатации

Страница: 48 / 79

Section 2
is a diagnostic program that helps you
detect problems with the video circuitry.
provides display parameters in addi-
tion to those included in the VGA BIOS.
provides support for the VESA BIOS
Extensions standard.
The following sub-sections explain each program and
driver in detail. The instructions assume that you know
basic MS-DOS commands. See your
MS-DOS User’s
Guide for information about MS-DOS commands.
is a menu-driven program that allows you
to select the utility programs and software drivers you
want to install on the hard drive. SETUP can only be
run from a diskette, and it can copy files either to the
hard drive or to a diskette.
Note:
tiles
on diskette compressed. You
us8 to install the on the hard
The following steps explain how to run
from the diskette drive:
1. Insert the VGA Utilities and Drivers
diskette into the diskette drive and make the
diskette drive the default drive.
2. Run SETUP from the diskette; type SETUP
and press at the system prompt. You
should see the following screen:
The options available in the program are ex-
plained below:
Load In CONFIG.SYS installs
BIOS.SYS in your CONFIG.SYS file. See
BIOS.SYS later in this section.
DO1
2-2