Mylex ML466, Инструкция по установке и эксплуатации

Страница: 21 / 79

1
486SX
487SX Intel Overdrive
and DX2
Note: you have an or
Overdrive” set
the
to indicate
the processor speed. For example, if you have an
804660X2-50 set jumpers
and 0 25 MHz. Information will still be processed
at the doubled speed.
should always have a jumper installed when the
socket is used. If you
have just installed a microprocessor in the socket,
make sure jumper is ON. If socket is empty,
remove the jumper from
Replace the cover on the system by replacing
the screws removed in step 1. Replace the
monitor and power cables, and any other
peripherals and turn the system on.
You must set the microprocessor speed in the
CMOS Setup.
Note: If you have installed an or
microprocessor, set the microprocessor
1992
1-7