Mylex ML466, Инструкция по установке и эксплуатации

Страница: 37 / 79

1
Board
COLOR/MONO SWITCH ON PCB INCORRECT
STUCK KEY OR KEY PRESSED
CLOCK NOT
CORRECTLY RUN SETUP
TIME AND DATE CORRUPT RUN SETUP
MATH COPROCESSOR HARDWARE INFORMA-
TION
INCORRECT RUN SETUP
MACHINE IS LOCKED TURN KEY
Diskette Error Messages
The following messages indicate an error with the
diskette drive, or the way the diskette drive is config-
ured in the CMOS Setup. If you see one of these error
messages, make sure the CMOS Setup is correct
before replacing a hardware component or contacting
Mylex’s Technical Support
NO BOOTABLE FLOPPY DRIVE 0 INSTALLED
FLOPPY HARDWARE INFORMATION IS INCOR-
RECT RUN SETUP
FLOPPY HARDWARE INFORMATION IS
CONTRADICTORY
FAILURE OF TRACK-ZERO SIGNAL IN FLOPPY
DISK DRIVE
OF FLOPPY CONTROL HARDWARE
Hard Disk Error Messages
The following messages indicate an error with the
hard drive, hard drive or the way the hard
drive is configured in the CMOS Setup. If you see one
of these error messages, make sure the CMOS Setup
is correct before replacing a hardware component or
contacting Mylex’s Technical Support.
HARD DISK CONTROLLER FAILURE
HARD DISK ERROR
3-s
Copyright 1992