background image

 

 

 

 

2. Sixteen bytes in 

 address space (EISA 

specific)

3. 64KB in memory address space, non-cached.

(Note that although the LNE390 provides

32KB of shared 

 64KB memory

addresses are used by each board.)

The software driver communicates to the 

 by loading

and storing data packets to and from the 32KB shared mem-
ory. The management and allocation of the shared memory 
under the control of the host program.

In the case of a transmission, the 

 then uses 

 instruc-

tions to instruct the 

 to send the data packet. The

 then runs 

 and will attempt to transmit

the packet up to 16 times. Upon completion or error, the

LNE390 then 

 the host processor,

 can then

read status 

 and then handle the resulting condition,

For data reception, the software driver programs the 
indicating the appropriate buffer memory addresses for data
packet reception. When a data packet is received, the

 

 interrupts the host, and can then respond to the

received data packet.

Scope   This Document

The manual assumes the reader is familiar wlth normal ISA

and 

 style computer operating procedures, and   familiar

with the particular operating systems to be used. The proce-

dures detailed will enable the user to install the 

 In any

 host system with any of the supported operating sys-

tems.

 

   1992

Содержание 771002-D03














































Отзывы: