The LNE390 workstation driver can be found in the NET40 subdirectory of this diskette.
The name of the workstation driver is
is the companion
workstation driver installation information file required for installation of the
workstation driver.
To generate the required DOS workstation boot files, create the
diskette
using the “load
optional
diskette” options.
Then run the “install” program from the
diskette. Move to STEP 4 in the
screen displayed, and hit ENTER. Insert this LNE390 driver diskette and specify the
directory to load the workstation driver files.
From the window displayed, select the
LNE390 Ethernet Adapter” option. Then
select the required media types and the EISA slot number of the LNE390 card. Complete
the installation and reboot to connect to the Server.
OF
To install these drivers under DOS, Novell, LANMAN
etc. refer to the
manual, REV 3.0, and the appropriate operating system manual.
To install the driver under Windows for Workgroup, refer to the
file
in this diskette.
OF NDIS
Run the LANtastic INSTALL program as instructed in your LANtastic manuals. When
you reach the “Adapter Driver” field, select “Other NETBIOS compatible Ethernet
Adapter” and then continue with the installation.
The
installation creates a STARTNET.BAT file. Add the following two lines
in this file, immediately after the line containing “SHARE
AI-NDIS
AILANBIO
Copy the file AI-NDIS.EXE from the LANTASTIC diskette labeled,
SUPPORT”
to the directory where you installed the LANtastic software (usually C:\LANTASTI).
Make sure the
file is also present in this directory.
