Copy the file
from this LNE390 driver diskette, to the directory where you
installed the
software (usually
as given below.
C:\LANTASTI
Edit the CONFIG.SYS file to include the commands to load the protocol manager and
NDIS MAC driver. The sample CONFIG.SYS below loads the protocol manager,
PROTMAN.DOS and the NDIS MAC driver,
for a Mylex
adapter:
FILES=50
BUFFERS=32
LASTDRIVE=Z
In the LANTASTI directory, create a
file to store the settings for the
protocol manager and the NDIS driver loaded in the CONFIG.SYS. For example:
SAMPLE PROTOCOL.INI
DRIVERNAME = PROTMAN$
DYNAMIC = YES
DRIVERNAME =
SLOT = 4
/*Enter the EISA Slot Number of LNE390
This completes the installation procedure.
The table below lists all the directories and files in this disk and their description.
CFG:
bytes 3814 dated
needs to be copied into the EISA
configuration diskette for configuring the
!MLXOOll CFG:
bytes 3805 dated 06-16-92 needs to be copied into the EISA
configuration diskette for configuring the
TESTLNE EXE:
bytes 4175 dated 07-13-90 is used for checking the
card. See TESTLNE.DOC for more details on how to run this test.
TESTLNEB EXE:
bytes
4427 dated 06-19-92
is used for checking
the
card. See TESTLNE.DOC for more details on how to run this test.
