LNE390
Ethernet IAN
for NetWare
-
-
<name>
An arbitrary name assigned to
the
type
combination. Note that this
eymbol appears both in the
LOAD and the BIND
commande, and
them
together.
<frame type>
The
slot number of the
board.
The frame type to be supported
by this copy of the driver.
An IPX network identifier
number assigned to the
Ethernet segment being
serviced. Note that this
symbol must be the same as
other NetWare servers on the
same segment.
For a more complete description of the
NetWare LOAD and BIND commands (such
as
different possible frame types), refer to the
NetWare documentation.
LOAD and BIND commands are normally
located within the AUTOEXEC.NCF file that
the NetWare server executes each time it
IS
started. This file may be edited from within the
server by executing the INSTALL program
provided with NetWare (started with a LOAD
INSTALL) command.
Alternatively. the LOAD and BIND commands
may also be typed in at the “dot prompt”, as a
manual command This method is normally
used in experimental servers where the
configuration changes frequently, or when
debugging a network.
1992
3 0
3-3
