Soltwate
The
files
l
for
and
files for
are located on the
Driver Disk-
ette (DOS format).
The
contain the driver configuration infor-
mation.
To run the
program, refer to the appropri-
ate
documentation. The
and
SEISAB.OBJ files are expected in the
directory.
Once the
program has been generated
by the WSGEN program, is run as a TSR (Termi-
nate and Stay Resident) program under DOS. If
the IPX program is unable to properly communicate
with the
board it was compiled for, an error
message will
If the IPX invocation is successful, the appropriate
DOS shell provided by Novell is then
loaded as an additional TSR program. There are
several different DOS shells to use, depending on
the version of DOS and me features required. For
example,
is used for DOS4, and
is used as a shell that locates
In XMS memory. Refer to the Novell documenta-
tion for details.
NetWare ODI Workstation Driver
Another method of integrating a DOS workstation
Into a NetWare
is by using the ODI Worksta-
tion Shell. The
can support more than one
adapter on me workstation, and support more
than one protocol on each board
3.0
