MW TOOLS 724563080, Руководство пользователя

Страница: 54 / 72

54
M1.1.SL300U-SL300UM.NLFREN 28082018
EN
U
U
S
S
E
E
R
R ‟
‟
S
S
M
M
A
A
N
N
U
U
A
A
L
L
V
V
1
1
.
.
0
0
2
2
0
0
1
1
4
4
0
0
8
8
- 19 -
When conducting oil make-up operation, the platforms must not be load .
Picture 26
No load of main machine test:
-Turn on the power QS.
-
Press “UP” button SB1, pay attention to the synchronization and placidity of the lifting.
-Check whether heightest limit of platforms is correct and reliable.
-
Press “LOCK” button SB3,check whether safety pawl is correctly located,
the oil line and the gas line are
leakage.
When testing the lift, no person or other things are allowed to stand or be put near the two sides
and beneath the machine. If any abnormal is found, stop it timely. After clearing obstacles, do the
test again
.
Load of main machine test
- Drive the vehicle whose weight doesn‟t exceed maximum lift weight to the platform, and then the driver
leave it.
-
Press “UP” button SB1, lift the platform and pay attention to the synchronization and placidity of the
lifting.
-Check whether rack and hydraulic pump work normally .
-Check whether heightest limit of platforms is correct and reliable.
-
Press “LOCK” button SB3,check whether safety pawl is correctly located,the oil line and the gas line are
leakage.
When beginning load of machine test, no person or other things are allowed to stand or be put
near the two sides and beneath the machine.
Te
st vehicle whose weight doesn’t exceed maximum lift weight.
Check whether the oil line and the gas line are leakage. If any abnormal is found, stop it timely.
After clearing obstacles, do the test again
.
G
I
A
B
E
F
D
C
H
Picture 26
No load of main machine test:
• Turn on the power.
• Press “UP” button, pay attention to the synchronization and placidity of the lifting.
• Check whether highest limit of platforms is correct and reliable.
• Press “LOCK” button, check whether safety pawl is correctly located, the oil line and the gas line are leakage.
WARNING!
When testing the lift, no person or other things are allowed to stand or be put near the two sides
and beneath the machine. If any abnormal is found, stop it timely. After clearing obstacles, do the
test again.
Load of main machine test:
• Drive the vehicle whose weight doesn’t exceed maximum lift weight to the platform, and then the driver leave it.
• Press “UP” button, lift the platform and pay attention to the synchronization and placidity of the lifting.
• Check whether rack and hydraulic pump work normally .
• Check whether highest limit of platforms is correct and reliable.
• Press “LOCK” button,check whether safety pawl is correctly located,the oil line and the gas line are leakage.
WARNING!
When beginning load of machine test, no person or other things are allowed to stand or be put
near the two sides and beneath the machine.
Test vehicle whose weight doesn’t exceed maximum lift weight.
Check whether the oil line and the gas line are leakage. If any abnormal is found, stop it timely.
After clearing obstacles, do the test again.
7 Operation
WARNING!
Only skilled and having been trained personnel is allowed to perform the operations. Check
proceedings as following.
Before operation:
• Clear obstacles around the lift before operation.
• Pay attention to the synchronization and placidity of the lifting.
• Check whether the safety claw is flexible and reliable.
• Check whether the lift will stop automatically when it lift to the highest position
• No air leakage in the solenoid valve,air cylinder,air hose and union.
• Check whether the working sound of motor and gear pump are normal.
• Check whether the lifting vehicle or other goods exceed the capacity of the lift.
copyrighted
document
- all
rights
reserved
by
FBC