MUTOH VJ-1628TD, Руководство по эксплуатации

Страница: 249 / 274

VJ-1628TD, VJ-2628TD OPERATION MANUAL 7 Troubleshooting
7-11
7.2.2 Message type error display and remedies
This section describes message type errors and remedies.
Message type errors are displayed when certain failures occur during printer operation.
If a message type error occurs, the printer may display the following error messages on the operation
panel and stop operation.
If the printer stops operating, solve the error so that the printer restarts.
No. Display Description Remedy Reference
1 Undefined Media Media detection has failed.
(Stops operation) Reload the media.
3.5 Setting
media
2 Media Slant Media is fed obliquely.
(Stops operation) Reload the media.
3.5 Setting
media
3 End Of Roll Roll media has run out.
(Stops operation) Load a new roll media.
6.1.2 Replacing
roll media
4 Full WasteInkTank The waste fluid tank is full.
(Stops operation) Dispose of waste fluid.
6.3 Disposal of
waste fluids
5 Life Times
[Head 1] The operational life of the
print head 1 has almost
expired.
(Continues operation) Contact your local MUTOH
dealer. —
6 Life Times
[Head 2] The operational life of the
print head 2 has almost
expired.
(Continues operation) Contact your local MUTOH
dealer. —
7 Life Times
[Pump] The operational life of the
pump motor has almost
expired.
(Continues operation) Contact your local MUTOH
dealer. —
8 Life Times
[CR Motor] The life CR motor is almost
expired.
(Continues operation) Contact your local MUTOH
dealer. —
9 Life Times
[PF Motor] The operational life of the PF
motor has almost expired.
(Continues operation) Contact your local MUTOH
dealer. —
10 Set Height to Low The head height is set to High
during the procedure to turn
the power OFF, or during the
head washing, ink
replenishment, or head
cleaning.
(Stops operation) Return the head height to
Low.
3.2.2 Turning the
power OFF
11 Don’t Start Sleep Mode Sleep Mode cannot be
performed because the printer
is not normal condition.
(Stops operation) Return the product normally.
5.7.1 Set Timer
menu
5.7.2 Sleep
Mode Start menu
12 Smart/C Near End The remaining amount of ink
in the Smart/C is low.
(Continues operation) Charge Smart/C. —