MUTOH VJ-1628TD, Руководство по эксплуатации

Страница: 240 / 274

7 Troubleshooting VJ-1628TD, VJ-2628TD OPERATION MANUAL
7-2
7.1 Malfunctions and failures
This section describes undisplayed malfunctions and failures of the printer, possible causes and
countermeasures.
7.1.1 Problems in installation and introduction
(1) Cannot perform the initial ink charge
(2) Ink does not come out after ink replenishment
7.1.2 Cannot print at all
(1) Does not work at all after turning on the power
No. Possible cause Remedy Reference
1 Is the front cover open or media loading lever
raised? Close the front cover, or lower the media
loading lever.
3.5 Setting
media
2 Is the maintenance cover open? Close the maintenance cover.
6.2.4 Cleaning
the cleaning wiper
unit
3 Are all ink cartridges fully inserted? Fully insert all ink cartridges.
6.1.1 Replacing
ink cartridges
No. Possible cause Remedy Reference
1 Is the ink cartridge cold and frozen? Leave the ink bag at room temperature for at
least three hours, and perform cleaning
several times.
6.2.3 Head
cleaning
2 Is the power turned OFF during ink
replenishment? Turn the power ON again and continue ink
replenishment.
3.4 Installing ink
cartridges
3 Occasionally, normal printing cannot be
performed after ink replenishment. Perform little charge.
6.2.3 Head
cleaning
No. Possible cause Remedy Reference
1 Is the power cable connected to the plug? Connect the power cable.
3.1 Power cable
connection
2 Does the AC power supply provide the
specified voltage? Connect the cable to another outlet.
3.1 Power cable
connection
3 Is the front cover open or media loading lever
raised? Close the front cover.
Lower the media loading lever.
3.5 Setting
media
4 Is the maintenance cover open? Close the maintenance cover.
6.2.4 Cleaning
the cleaning wiper
unit