Viper TX – Operation Instructions
66
AP-75710, Rev. 1.1, 09/01/2008
5.2.1.2 Replacement procedure
Caution
•
When handling ink cassettes, be careful that ink does not get in your eyes or on your skin.
However, if this happens, flush imfabrictely with water.
Otherwise, your eyes may become congested or slightly inflamed. If you feel discomfort,
consult a doctor imfabrictely.
•
Do not disassemble ink cassettes. Otherwise, ink may get in your eyes or on your skin.
•
Do not shake ink cassettes. Doing so may cause ink to leak out.
Step 1 :
If the printer is turned on, make sure the following requirements are met :
•
Printing or other operations are not performed.
•
Make sure that the display on the operation panel shows the normal state.
•
The FABRIC SET light on the operation panel goes off.
Step 2 :
Open the ink compartment cover.
Caution
•
Be sure not to pinch your fingers while opening and closing the ink compartment cover.
Step 3 :
Remove the ink cassette from the ink cassette slot.
Notes
•
Dispose the used ink cassette by putting it in a plastic bag in accordance with local regulations or
laws.
Step 4 :
Take the new ink cassette from its package.
Step 5 :
Install the ink cassette.
Step 6 :
Close the cover of the ink compartment.
Step 7 :
Make sure that the display on the operation panel returns to normal status.
Notes
•
If you replace ink cassettes while printing, the printer resumes printing.
Notes
•
Unpack the ink cassette just before installing it into the ink cassette slot. If you leave the cassette
unpacked for a long time, the printer may not be able to print correctly.
•
Use ink cassettes within two years from the date printed on the cassette packages.
•
Replace ink cassettes after six months of installation.
Downloaded From ManualsPrinter.com Manuals
