MUTOH Viper TX, Руководство по эксплуатации

Страница: 29 / 88

Viper TX – Operation Instructions
29
AP-75710, Rev. 1.1, 09/01/2008
3.5 CALIBRATING THE WINDER SYSTEM
3.5.1 Calibrate the tensioning systems
Parts and Tools :
Included in kit
No. Description Quantity
1 Synthetic paper strip 1
2 Hexagon wrench 2,5 mm 1
3 Hexagon wrench 3 mm 1
4 Hexagon wrench 4 mm 1
NOT included in kit
No. Description Quantity
1 Tape 1
2 Pencil 1
3.5.1.1 Checking the calibration
The procedure below describes the calibration check of the rear tensioning system. The procedure to check
the front tensioning system is the same.
P
ART
1 : P
REPARING THE SYNTHETIC PAPER STRIP
Step 1 :
Put the pressure rollers in the up position.
Step 2 :
Go to the back of the machine
Step 3 :
Create a loop with the synthetic paper strip around the upper bar of the rear tension system.
Step 4 :
Check if the edges of the loop (indicated on the images below) are aligned on each other.
Downloaded From ManualsPrinter.com Manuals