Section 75
00-02-0522
04-06-11 -
9 -
Level 3 - Parameter Edit Access
. Allows for viewing and parameter editing
but does not allow calibration of AC.
Level 4 - Calibration Access
. Allows calibration of AC parameters.
Level 5 - kW Limit Edit and Config Select Access
. Allows editing of kW
limits and various communication addresses.
2. Language
- Allows selection of language used to display text.
a. English (Default)
b. Spanish
c. etc. (future expansion)
3. Driven Equipment Type
- Allows selection of type of equipment that is driven by the
engine.
a. None (engine only, ignores all AC parameters)
b. AC Alternator (Genset) (Default)
4. Key Sensitivity Level
- Determines how sensitive the touch pad keys are for your
application.
a. Low*
b. Normal (Default)
c. High
5. Default Screen
- When the system is running this selects the screen that will show.
Event
History
Warnings
/
Status
Engine / Gen Status
Meters
Nominal
Meter
Splash
Screen
Information
NOTE
:
*
Newer versions of the controller/software will not have a “LOW”
sensitive selection.
6. Lamp Test
- Tests LCD.
7. LCD Backlight
- Turns the iGUARD display backlight off, unless an error condition
activates the common visual alarm.
a. Disabled
b. Enabled (Default)
8. Guard Beeper
- Keypress indication and/or audible warning buzzer.
Phase-out
/ Discontinued
Product
Check
Availability
