Section 75
00-02-0522
04-06-11 -
11 -
time and date of iGUARD.
17. Input - Output Test
- Shows the status of the analog inputs, digital inputs, and relay
outputs.
a. The analog input screen shows any change in the inputs. For example
if the resistance value of a resistive sender changes, the counts will
change.
i.
Analog channel number
ii. Name/setup
label
iii. Actual
value
b. The digital input screen shows the status of the digital inputs.
i.
Digital Input Number
ii. Name/setup
label
iii. Made/open
c. Relay output status allows the forcing of any relay out. The screen
shows:
i.
Relay output number
ii. Name/setup
label
iii. State
NOTE
: Analog values, digital input, and relay status may be read on these
screens at any time. The relays may only be forced in
“
Manual Mode
”
while not running.
18. Reset Configuration
- Allows user to force a complete reset to a known state and clears
all programming and customization.
19. Operation Mode
a. Manual, Auto, NFPA - If not in Auto, you
’
ll get Not-In-Auto alarm.
b. Manual, Auto No Warning - It disables the Not-In-Auto alarm.
c. Manual Mode Only - Can only be started from the front keypad.
20. Duplicate Senders
- Allows
‘
one only
’
or more than one sender for engine pressures
and temperatures.
21. Repeater #1
(set to Mimic as Default)
a. Set as Mimic Allows control capabilities without programming.
b. Set as Annunciator Allows viewing without control.
Phase-out
/ Discontinued
Product
Check
Availability
