Muratec MFX-2590 Скачать руководство пользователя страница 120

Страница: 120 / 317

1
2

Basic F

ax Functions

Basic Faxing 3-35

Indicators During Reception

If the other party has registered their name and fax number in their machine, that

information is displayed on the fax ready screen. The information lamp flashes green

during reception.

Note

If the other party has registered their name in their machine, that name is

•

displayed on the screen. If the other party has registered their fax number in their

machine, that fax number is displayed on the screen. If both their name and fax

number are not registered, nothing is displayed.

Do not pull out the paper cassette during printing. This may cause a paper jam.

•

Reception will be canceled if the memory becomes full during reception. Contact the

•

other party and ask them to transmit the fax again.

Make sure that too much paper does not accumulate in the paper output tray. This

•

may make it difficult for paper to be output, and cause a paper jam.

Memory Reception

Memory reception is a function that stores the received document in memory when paper

has run out or when performing security reception. When the problem preventing the

document from being printed is resolved, the stored document is automatically printed.

When a document is stored in the memory of the machine, the information lamp is

illuminated green.

Note

Leave the power of the machine ON when replacing paper or toner.

•

A maximum of 250 transmissions can be stored in the machine. However, this value

•

differs according to the free memory available in the machine.

When the memory becomes full during memory reception, the fax reception will

•

be canceled and an error message is displayed. When the problem preventing the

document from being printed is resolved, the portion of the received document that

could be stored will be printed. Contact the other party and ask them to transmit

the fax again.

When the power shuts off during memory reception, the contents stored in memory

•

will be preserved for approximately 72 hours. Note that the power of the machine

has to have been turned ON for at least 24 hours in advance.

If printing cannot be performed due to a device error such as a paper jam or running

•

out of paper, the information lamp is illuminated red.

Содержание MFX-2590






























































































































































































































































































































Результаты поиска

Содержание MFX-2590

Отзывы:

Похожие инструкции для MFX-2590

Бренды по названию

Популярные бренды

Muratec MFX-2590, Быстрое руководство

Результаты поиска

Содержание MFX-2590

Отзывы:

Похожие инструкции для MFX-2590

Бренды по названию

Популярные бренды