Muratec MFX-2590 Скачать руководство пользователя страница 107

Страница: 107 / 317

3-22 Basic Faxing

Press [Resolution].

If [Resolution] is not displayed, press the [Advanced] tab and then select [Resolution].

Select the desired resolution, and press [Enter].

Specify the destination, and press <Start>.

For details on specifying the destination, refer to “

•

Selecting from the Address Book

”.

(See

page 5-2.)

If you loaded the document in the ADF, this concludes the procedure.

•

If you loaded the document on the document glass, load the next document, and press

•

[Next Doc]. Press [Tx Start] to start transmission.

Note

The Super Fine mode may not be supported by the destination machine. In this

•

case, the optimal resolution will be automatically selected.

The communication time differs according to the selected resolution.

•

Содержание MFX-2590






























































































































































































































































































































Результаты поиска

Содержание MFX-2590

Отзывы:

Muratec MFX-2590, Быстрое руководство, Страница: 107 / 317

Результаты поиска

Содержание MFX-2590

Отзывы: