Muratec Dynamo MFX-2530 Скачать руководство пользователя страница 29

Страница: 29 / 203

1.13

Getting started

Shake the new drum cartridge hori-
zontally.

Align the green labels on both ends of
the new drum cartridge with the
green labels on the rails of the
machine and set it to the machine.

Grasp the handles and push the drum
cartridge into the machine until it clicks.

Close the printer cover.

Installing / changing the toner bottle

Note: Use ONLY the specified toner for this machine. Using any other toner could

result in damage.

Note: Be careful not to drop the toner bottle from 1 m (about 40 inches) or more

height. It may cause damage to the toner bottle.

Open the toner bottle cover.

Gently pull out the used bottle.

Note: If the toner bottle cover is opened

while the bottle is turning, the
bottle may be locked in place. If
this happens, close the cover, wait
for the bottle to stop, and try
again.

Sharply tap the new toner bottle against a
desk or other hard surface four or five
times. Then turn the toner bottle upside
down and tap it the same way again.

Getting Started

All manuals and user guides at all-guides.com

Содержание Dynamo MFX-2530












































































































































































































Результаты поиска

Содержание Dynamo MFX-2530

Отзывы:

Похожие инструкции для Dynamo MFX-2530

Бренды по названию

Популярные бренды

Muratec Dynamo MFX-2530, Руководство по эксплуатации

Результаты поиска

Содержание Dynamo MFX-2530

Отзывы:

Похожие инструкции для Dynamo MFX-2530

Бренды по названию

Популярные бренды