IceDry 800/1400
Item
Description
Function
7
Reactivation Heater (Stage 2) Indicator
The indicator is on when the relevant heater stage is switched
on. The indicator will flash to indicate a heater (stage 2) fault.
8
Process Air Fan Indicator
The process air fan indicator is on when the fan is running. The
indicator will flash to indicate a fault.
9
Drive motor indicator
The drive motor indicator is on when the rotor drive motor is
operating. The indicator will flash to indicate a drive motor fault.
10
Not applicable
11
Not applicable
12
Fault warning indicator
When the fault warning indicator is flashing, it indicates that
the unit has shut-down due to one of the following faults being
detected:
- Process air fan fault
- Reactivation air fan fault
- Drive motor fault
- Electric reactivation heater (stage 1) fault
- Electric reactivation heater (stage 2) fault
To assist with fault diagnosis, the corresponding indicator will
be flashing.
In addition the remote fault output relay will be activated -
general indication.
For further details refer to section
.
13
Unit running indicator
Indicates that the unit is running.
14
Power Connected indicator
Indicates that main power has been connected to the
dehumidifier and the main power switch is in the “1” position.
Table 5.1 Functions for operator panel.
18
Operation
190TGB-1037-G1307
