IceDry 800/1400
6
Service and maintenance
6.1 Safety
W
W
WARNING!
ARNING!
ARNING!
Adjustments, maintenance and repairs must only be carried out by qualified personnel.
CA
CA
CAUTION!
UTION!
UTION!
At initial start-up or when restarting after a service stop, the main power switch must have been on for at least 12
hours before starting. This is necessary to remove any ice build-up inside the unit.
CA
CA
CAUTION!
UTION!
UTION!
Before starting the unit, the reactivation and wet air inlets and outlets must be thoroughly checked. Any ice must be
removed. To avoid malfunction, it is important to have clear air passage throughout the ductwork.
6.2 General
The dehumidifier is designed for continuous use over a long period of time with a minimal amount of
supervision. Under normal operating conditions, maintenance requirements are minimal. The service
interval depends mainly on the operational conditions and working environment.
See section
6.5, Service and maintenance schedule
for an example of a standard service and maintenance program.
6.3 Service options
In addition to commissioning of the unit there are four service options (A - D) as standard.
S
. Commissioning/start-up.
A
. Inspection and if necessary change of filter. General function check.
B
. In addition to A, safety check and capacity, temperature and humidity regulation measurements.
C
. In addition to B, preventive replacement of some components after 3 years of operation.
D
. In addition to C, preventive replacement of some components after 6 years of operation.
NOTE!
Always contact Munters for service or repair. Operating faults can occur if the unit is maintained
insufficiently or incorrectly.
NOTE!
Commissioning/Start-up inspection "S" by Munters is mandatory to validate the full warranty.
Munters service engineers
have special equipment and rapid spare parts access to handle service on all
Munters products. All test equipment used by our personnel to ensure proper system balancing is certified
for accuracy.
Munters Service
can offer a service plan adapted to suit the conditions of a specific installation. See contact
addresses on the back page of this manual.
6.4 Extended warranty
Munters offers an extended warranty to the standard terms when the Customer signs a service contract with
Munters. Details are available on request.
190TGB-1037-G1307
Service and maintenance
21
