IceDry 800/1400
5.4 Operator panel
1
150 C
100 C
50 C
o
o
o
AUT
MAN
4
5
6
7
8
10
9
11
12
13
14
0
2
3
Item
Description
Function
1
Main Power Switch
With the main power switch selected to the “0” position, power is
removed from the control circuit and the unit cannot be started.
With the main power switch selected to the “1” position, power is
applied to the control circuit and the dehumidifier can be started
using the Mode switch.
The main power switch must always be on to avoid build up of
ice inside the unit.
2
Reactivation air fan indicator
The reactivation air indicator is on when the fan is running. The
indicator will flash to indicate a fan fault.
3
Reactivation air temperature display
Indicates reactivation air temperature.
4
Mode switch
With the mode switch in the “MAN” position, the dehumidifier
will operate in the manual mode. In this mode the unit will run
continuously (full capacity).
With the mode switch in the “O” position, the dehumidifier is
switched off.
NOTE! AUT (Automatic mode) - not applicable
5
Not applicable
6
Reactivation heater (Stage 1) Indicator.
The indicator is on when the relevant heater stage is switched
on. The indicator will flash to indicate a heater (stage 1) fault.
190TGB-1037-G1307
Operation
17
