4.11 Installation of multi-module water system pipeline
Multi-module combination installation involves special design of the unit, so relevant explanation is given as follows.
4.11.1 Installation mode of multi-module combination water system pipeline
a. Installation mode I (recommended installation mode)
No.n module
No.(n-1) address
No.1 module
No.(n-1) module
No.(n-2) address
No.0 address
Water flow switch
Pump
Fig.4-6
(less than 6 modules)
b. Installation mode II (recommended installation mode)
No.n module
No.(n-1) address
No.1 module
No.(n-1) module
No.(n-2) address
No.0 address
Pump
Fig.4-7
(installation mode A: less than 16 modules)
Water flow switch
Drill dead hole at the
position, and move the
total effluent temperature
sensor at No.0 address to
the position
Installation & owner's manual
9
Modular Chiller MUEN-H6
