Installation & owner's manual
29
4.1 On and Off the main unit
1) Press the On/Off key to control On and Off status of the main unit.
2) Under Off status, press the On/Off key “ ” to operate the main unit, at that time the LCD of
wire controller will display the operation icon “ ”. The main unit will be operated as the
current setting of the wire controller.
3) Under On status, press the On/Off key “ ” to off the main unit, at that time the operation icon
“ ” on the LCD of wire controller will disappear.
4. Operation instruction
Fig.4-1
Press one time
RUN
WATER
TEMP.
TIMER
ONLINE
QUANTITY
(Press for 3sec to
cancel timer)
(Press for 3sec to
unlock)
AUXILIARY
→
→
→
WATER
TEMP. TIMER
4.2 Setting operating modes and parameters
Press “Setting” key to enter the operation mode and parameters setting. The setting contents will
change as the following order each time the key is pressed:
▲
1) Setting water temperature: under main page directly press the “▲” or “▼” to adjust the water
temperature, or press “Setting” key to enter and then press “▲” or “▼” to adjust. At that time the
LCD will display “Setting temperature” and “Water temperature parameter”, as the following display.
Query water temperature setting: press the “ ” or “ ” key under the main page to query the set
water temperature numerical value.
TEMP. DIFFERENCE
MODE
Fig.4-2
Fig.4-3
WATER
TEMP.
ONLINE
QUANTITY
Press one
time
SET
RUN
TIMER
1
TIMER
ON
2) Timing setting: can set 3 timing periods on the wire controller: Timer 1, Timer 2, Timer
3, and then control the main unit to ON and OFF in different periods. Setting method:
press “Setting” key under main page twice to enter timing setting. At that time the LCD
will display as the following:
(Press for 3sec to
cancel timer)
(Press for 3sec to
unlock)
AUXILIARY
Fig.4-4
Fig.4-5
1
TIMER
OFF
This time the hour of the clock will flash, it means the current setting is the hour of Timer 1 “On”, press
the “▲” or “▼” to adjust, press “ ” key when finished, and then the minute of the clock will flash, it
means the current setting is the minute of Timer 1 “On”, press the “▲” or “▼” to adjust, press “ ”
key when finished, the LCD will display as the following:
▲
▲
WATER
TEMP.
ONLINE
QUANTITY
RUN
TIMER
ON
Press
twice
(Press for 3sec to
cancel timer)
(Press for 3sec to
unlock)
AUXILIARY
Fig.4-6
Fig.4-7
TIMER
TIMER
ON
At this time the hour of the clock will flash, it means the current setting is the hour of the Timer 2 “On”,
and the follow setting method will be the same of the Timer 1. Similarly, the setting of Timing 3 is the
same with this method. After setting, press “OK” key or wait for 7 seconds then the setting to be
effective, and the LCD will display the effective timing information, as the following display:
This time the hour of the clock will flash, it means the current setting is the hour of Timer 1 “Off”, press
the “▲” or “▼” to adjust, press “ ” key when finished, and then the minute of the clock will flash, it
means the current setting is the minute of Timing 1 “Off”, press the “▲” or “▼” to adjust, press “ ”
key when finished, the LCD will display as the following:
▲
▲
Yes
No
Yes
No
Example of Timing setting
Main page
▼
Press “Setting” key twice to enter hour setting
interface of “Timer 1 On”
▼
▼
▼
Press “ ” key to enter minute setting interface of
“Timer 1 On”, adjust the minute number to be 10
Press “ ” key to enter hour setting interface of
“Timer 1 Off”, adjust the hour number of “Timer 1
Off” to be 12
Through the “▲” or “▼” key, set the hour
number of “Timing 1 On” to be 07
Press “ ” key to enter minute setting interface of
“Timer 1 Off”, adjust the minute number to be 30
The setting steps of “Timer 2” and “Timer 3” are the same as “Timer 1”,
after setting all the settings then press “OK” key, and the3 timing periods
will be effective, and then back to the main page.
“Timer 1” setting
failed, after 7
seconds, the
page shift to
Successfully set the On time of
“Timer 1” to be 07:10 and Off time
of “Timer 1 Off ” to be 12:30, then
back to the main page.
Finish setting the On time of
“Timer 1” to be 07:10 and Off
time to be 12:30, then enter the
setting of “Timer 2”.
Whether press “OK” key
Whether press “ ” key
5：00
8：00
10：00 12：00 18：00 22：00
5：00
8：00
7：00
12：00
To avoid the timing error, each period of timing should not be crossed. E.g.:
Correct:
Wrong:
TIMER 1
TIMER 2
TIMER 1
TIMER 2
TIMER 3
NOTE
During any period of timing setting to press “OK” key , then the timing period has been set
will be effective (only when the “On” and “Off” of one timing period have been set then this
period setting can be finished).
Press “Cancel” then cancel the setting. Query timing information: if query the timing hour
which has been set, press “ ” or “ ” key under main page, the On and Off time of
Timer1, Timer 2 and Timer3 will be displayed in turns.
Cancel timing: long press “Cancel” key for 3 seconds, then all the effective timing periods
will be cancelled.
▲
3) Set working mode
Press “SET” key 3 times to enter the working mode setting when the main unit is off power.
press
the “▲” or “▼” key to adjust , press “OK” key or wait for 7 seconds to be effective, and
back to the main page; During setting process to press “Cancel” key then will exit
without saving. See fig.4-8
Fig.4-8
WATER
TEMP.
ONLINE
QUANTITY
RUN
Press
3 times
Working mode setting is valid only when the unit is power off.
NOTE
(Press for 3sec to
cancel timer)
(Press for 3sec to
unlock)
AUXILIARY
Modular Chiller MUEN-H6
