Installation & owner's manual
Modular Chiller MUEN-H6
10
Table 4-2
4.11.2 Table of diameter parameters of main inlet and outlet pipes
CAUTION
Please pay attention to the following items when installing multiple modules:
● Each module corresponds to an address code which cannot be repeated.
● Main water outlet temperature sensing bulb, target flow controller and auxiliary electric heater are under control of the main module.
● One wired controller and one target flow controller are required and connected on the main module.
● The unit can be started up through the wired controller only after all addresses are set and the aforementioned items are determined. The
wired controller is ≤500m away from the outdoor unit.
ŏ4ŏ
ψ4ŏ
ψ4ŏ
ψ4ŏ
ψ4ŏ
ψ4ŏ
ψ4ŏ
ψ4ŏ
ψ4ŏ
'1
'1
'1
'1
'1
'1
'1
'1
'1
Total inlet and outlet water
pipe inside nominal diameter
Cooling capacity
