Munch Machine Mother Bucker MB1, Руководство оператора

Страница: 18 / 24

18
o
Continuously monitor the outfeed of the machine to prevent the stem pile from
reaching the height of the upper frame tube. At this point the machine needs to
be unplugged and the stem pile needs to be removed from behind the machine.
§
WARNING – Machine must be unplugged before entering the guarded
area behind the machine.
§
ATTENTION – Failure to remove stem pile once it has reached the height
of the upper frame tube can result in machine damage or malfunction.
Daily Shut Down
o
Turn Machine to “OFF” position.
o
Unplug the machine.
o
Loosen Rollers using the provided 5/16” hex key. These bolts will not be
loosened to the point of removal.
o
Clean the machine using the method defined below.
o
Store the machine in a clean, dry, sheltered location.
Cleaning
This machine will perform at its best when cleaned after each use. The machine is built
to wash-down rated specification ns, but some precautions need to be adhered to.
Recommended cleaning materials
o
Rubber gloves
o
Stiff plastic bristle brush
o
70% rubbing alcohol, or citrus based cleaner , in a spray bottle
§
ATTENTION
- Do not use alcohol stronger than 70%. Anything higher will
have an adverse effect on the rollers and cause premature breakdown.
Use of high content alcohol will void the warranty.
o
Clean, low-lint rags
o
Plastic razor blades or application squeegee
With the Machine powered off, remove the hood. Use 70% alcohol in a spray bottle to
spray down rollers and interior sides of the Bucker Head and Lower Cross Plate. Use a
stiff bristle brush to scrub the rollers, then rotate the rollers by hand and repeat with
additional alcohol. Do the same for any debris that is left on the Bucker Head or Lower
Cross Plate. Once everything has been scrubbed down, apply 70% alcohol to a clean rag
and wipe down rollers, Bucker Head, and Lower Cross Plate until clean.