Munch Machine Mother Bucker MB1, Руководство оператора

Страница: 16 / 24

16
This machine has two handles built into the frame: one is located on the right side of the
machine, and the other is on the left side of the machine wrapping around the lower
end of the control panel. Only these two handles and the lower frame are to be used for
moving the machine.
§
WARNING – When moving equipment on an inclined surface, use
multiple people to prevent loss of control leading to injury or death.
§
ATTENTION - Do not move the machine by pulling on the Motor or
Bucker Head.
The machine will have one of two sets of wheels installed (this is the differentiating
factor between Indoor and Outdoor machines).
Indoor Casters
Indoor machines will come with 4” indoor casters installed. These casters allow for 360°
rotation on a concrete or paved surface.
Outdoor Wheels
Outdoor machines will come with 8” flat free outdoor tires. These allow for movement
on rough surfaces.
Machine Guarding
All guards must be in place before any operation of the machine. The die plate must be
installed properly, the hood must be installed properly, and the Control Panel must be
closed and locked.
To prevent processed stalk material from jamming in the outfeed side of the machine it
is not possible to closely guard the outfeed area. To ensure personnel cannot reach into
the rollers during operation a barrier guard on the sides and back of the machine must
be in place. Four posts (48” tall) and a metal or plastic chain set 36” away from the
machine and connected to the sides of the machine must be in place during operation.
Signs on the chain advising personnel to stay out when the machine is running must be
on the chain or posts.