Munch Machine Mother Bucker MB1, Руководство оператора

Страница: 13 / 24

13
The face plate has eight ¼ - 20 holes threaded into it. Four of these holes have a button
head bolt installed and serve as a placeholder for accessory options. The other four
holes closest to the center cutout are for Die Plate installation.
Die Plate
§
WARNING – Operation of the machine without the die plate or without
the die plate being properly secured will result in serious injury and
possibly death
To accommodate various uses of the machine, the machine has been designed to have
interchangeable die plates that are attached to the faceplate of the machine via four ¼ -
20 X 7/16” stainless steel button head bolts.
5 Hole Die Plate (Installed)
Developed for use with smaller plants, this plate allows for two operators to feed
material into the machine simultaneously. This configuration has 5 holes with diameters
of 0.3” (7.7mm), 0.45” (11.5mm), and 0.6” (15.2mm).
4 Hole Die Plate (Included)
Developed for use with larger plants, this configuration has four holes with diameters of
0.3” (7.7mm), 0.45” (11.5mm), 0.6” (15.2mm), and 0.75” (19mm)