Munch Machine Mother Bucker MB1, Руководство оператора

Страница: 11 / 24

11
Hood Removal
Unplug the machine. Approach from the back side and locate the two thumb screws on
the top of the hood. Also locate and note the position of the hood mount pegs, located
on the lower left and lower right sides of the hood. Loosen and fully remove the two
thumb screws one at a time while supporting the hood with the opposite hand.
§
CAUTION – Supporting the hood with one hand while removing the
thumb screws is crucial to prevent dropping the hood and possibly
causing injury.
While still supporting the hood, place one hand on each left and right side of the hood
using the lower edge for additional support, lift upwards on the hood while shifting it
towards your body (away from the machine) to allow the hood to clear the two hood
mount pegs.
Hood Installation
Unplug the machine. Approach the machine from the back side and locate the two hood
mount pegs on the lower left and lower right sides of the bucking head side plates. Also
locate the two roller tension bolts located on top of the force cap.