Munch Machine Mother Bucker MB1, Руководство оператора

Страница: 10 / 24

10
Roller Tension System
The rollers are one of the most essential elements of the entire system. Proper
maintenance and care are needed to keep them in optimal condition.
IMPORTANT: Remove roller tension when the machine is not in use to avoid developing
a flat spot in the rollers, which degrades machine performance. Apply tension prior to
bucking as shown below, and remove roller tension after use.
Applying Roller Tension
Using the provided 5/16” hex key, tighten the two bolts located on top of the hood until
fully seated with lock washers pressed flat.
Removing Roller Tension
Using the provided 5/16” hex key, loosen the two bolts located on top of the hood.
These bolts will only back out ~5 full rotations. Once you feel the bolt provide resistance
stop loosening. These bolts will not be loosened to the point of removal.
§
ATTENTION – Do not make any adjustments to the tensioning system of
the machine, the tension has been preset and will not need adjustment
unless otherwise directed by MUNCH Machine.
Hood
The hood of this machine is designed to protect the user from moving internal parts of
the machine, while allowing access for cleaning and maintenance. The hood must be
installed and secured properly before any operation.
§
WARNING – Keep all shields, guards and safety devices installed and in
proper working order at all times .