Once in the programming mode you have the following menu at your disposal:
0 + (site code) + A
: Programming of site code (number from 0 to 255)
1 + A
: Activation of mode 0 to 65535
4 + A
: Activation of mode 1000 to 65535
5 + A
: Activation of mode 10000 to 65535
9 + A
: Return to default settings
3.2.2.1 Programming the Site code
The site code represented by the first 8 bits of the code transmitted by the MONO-S. It is sent each time
a valid code is entered from it’s keypad.
Note: Site code is only available for 26-bit WIEGAND format.
In programming mode when the Yellow LED is on, press 0 + site code (number from 0 to 255) + A
For example: Program site code is 78
Press “0” 78 A (beep beep)
3.2.2.2 Activation of mode 0-65535
Once this mode is activated codes from 1 to 5 digits between 0 and 65535, are sent to the host
system.In programming mode when the Yellow LED is on, press 1 + A.
For example: Activate mode 0-65535
Press “1” + A (beep beep)
3.2.2.3 Activation of mode 1000-65535
Once this mode is activated only the codes from 4 to 5 digits between 1000 and 65535, are sent to the
host system.
In programming mode when Yellow LED is on, press 4 + A to activate.
3.2.2.4 Activation of mode 10000-65535
Once this mode is activated only the codes from 5 digits, between 10000 and 65535, are sent to the
host system.
In programming mode when Yellow LED is on, press 5 + A to activate.
3.2.2.5 Return to default settings
By using menu 9 the factory-set default settings are entered again in the MONO-S memory.
Default settings are:1. Mode 0-65535 active
2. Site code: 170
Important Note: When using a 26-bit WIEGAND format the highest code that can be sent to the host is
16
limited to 65535 (2 ). A higher code can be entered on the keypad but will not be transmitted. The
maximum number of bits available for the user code causes this limitation. See below for more details.
3.2.3 Data output from the MONO-S in 26-bit WIEGAND format
Parity bit (bit 1) + 8 bits header + 16 bits user code = 2 bytes +Parity bit (bit 26)
P1
XXXXXXXX
XXXXYYYY YYYYYYYY
P2
Example
180
31527
1
10110100
01111011 00100111
0
Note:
P1 = even parity calculated over the bits 2 to 13 (X).
P2 = odd parity calculated over the bits 14 to 25 (Y).
7
Содержание MONO-S
Страница 1: ......
