1.0 Introduction
MONO-S
is a multi-protocol peripheral keypad in an elegant plastic housing designed for both
indoor and outdoor use. This weather resistant keypad needs to be connected to a Host over a
communication bus. The protocol is user-selectable between the proprietary bus CODIX and the
standard bus outputs Wiegand 26 bit, Wiegand 30 bit or Data/Clock.
1.1 Specifications
Power Supply:
9 to 12V DC supplied over the communication bus
Power Consumption:
Standby 30 mA; Maximum 40 mA
Operating Temperature:
-15°C to + 75°C
Operating Humidity:
0 to 95% (non-condensing)
Applications:
For access control or alarm activation
Signals:
1 Bicolour LED (Red/Green)
1 Red free of potential
1 Yellow LED indicates programming, correct functioning of the
communication bus and valid/invalid codes
1 BUZZER indicates programming state, correct functioning of the
communication bus and valid/invalid codes
2.1 Mounting instructions
1. Fix the mounting sticker on the wall and drill 6 mm holes to the depth of 30 mm (approximately)
through the corresponding co-ordinates on the sticker.
2. Insert the plastic plugs (provided) into the drilled holes.
3. Insert the cable through the grommet in the rear panel of the MONO-S.
4. Fix the rear panel of the MONO-S to the wall with the two (8 x 30 CSK) mounting screws (supplied).
5. Ensure the wiring of the MONO-S is carried out as per the wiring instructions given in 2.2.
2.0 Mounting and Wiring Instructions
3
1 2
3
4
7
A
5
8
0
6
6
Rear panel
Front panel
Cover
Tamper Switch
Wall
Rear Panel
Ensure that the rear panel of MONO-S is pressed completely
against the wall so that the tamper switch is depressed
Содержание MONO-S
Страница 1: ......
