2.3.2 WIEGAND format
Connect the 2 power supply lines (G and + 12 V) and the 2 data lines (D0 and D1) to the Host system.
2.3.3 DATA/CLOCK format
Connect the 2 power supply lines (G and + 12 V) and the 2 data lines (CL and DA) to the Host system.
3.1.1 Entering the programming mode
1. Open the keypad housing.
2. Place the jumper in it’s closed position.
3. Close the housing.
4. A long beep is heard for 4 seconds and the Yellow LED lights up. Press the 'A' key within those 4
seconds. Bi-colour LED turns Red and 3 short beeps are heard.
2.4 Connection of the RED Free-tension LED on a 12V AC/DC Source
2.5 Connecting Tamper switch
The tamper switch is a security contact (NC) to detect the opening or tampering of the housing. Once
the keypad is installed against the wall the contact remains closed. MONO-S features double tamper
protection i.e. when the entire housing is tampered with or when the front panel is interfered with or
removed.
3.1 Selecting the output protocol
The user can select the required data output protocol by a simple programming menu. The available
protocols are :
26 bit Wiegand protocol
:
30 bit Wiegand protocol
:
Data/Clock protocol
:
CODIX bus protocol
3.0 Programming the MONO-S
5
+
-
LDR
(+12V )
(-12V )
Diode IN4001
+
-
( 12V ~ )
( 12V ~ )
LDR
Tamp
NO
C
WIEGAND Host
Max 200m
D0/CL
G
+12V
D1/DA
+ 12V DC
+ 12V DC
- 12V DC
- 12V DC
D0/CL
D1/DA
D1/DA
DATACLOCK Host
Max 200m
D0/CL
G
+12V
D1/DA
+ 12V DC
+ 12V DC
- 12V DC
- 12V DC
D0/CL
D1/DA
D1/DA
Содержание MONO-S
Страница 1: ......
