Crestron GLPPA-KP
Keypad for GLPP
Installation Guide
Crestron Electronics, Inc.
Installation Guide - DOC. 7211B
15 Volvo Drive Rockleigh, NJ 07647
(2031031)
Tel: 888.CRESTRON
08.13
Fax: 201.767.7576
Specifications subject to
www.crestron.com
change without notice.
DESCRIPTION
• T
o be installed and/or used in accordance with appropriate electrical codes and regulations.
•
If you are unsure about any part of these instructions, consult a qualified electrician.
WARNING:
To avoid fire, shock, or death; turn off power at circuit breaker or fuse and test that power is off before
wiring!
NOTES:
Observe the following:
The GLPPA-KP is an in-wall keypad for Crestron Green Light
®
Power Pack (GLPP)
systems, used to set and recall presets and turn on and off all loads connected to a
GLPP. Installation is made easy thanks to a 2-wire, low-voltage bus, which connects the
GLPPA-KP and GLPP main unit. Available in black, white, and almond, the GLPPA-KP
fits almost any décor. Up to three GLPPA-KPs can be connected to a single GLPP
system for multipoint control in a room.
Flexible Configuration
Two sets of button configurations accompany every GLPPA-KP: a rocker for turning
on/off and dimming and a set of four pre-labeled buttons—
ALL ON
,
ALL OFF
,
SCENE 1
, and
SCENE 2
. Scenes can be adjusted by any user directly right from the
keypad.
Easy Installation
Two flying leads connect the GLPPA-KP to the GLPP system via a non-polarized
low-voltage bus. Use a choice of new or existing high-voltage (Class 1) or low-voltage
(Class 2) wiring for quick installation.
Specifications
Specifications for the GLPPA-KP are listed in the following table.
Further Inquiries
To locate specific information or resolve questions after reviewing this guide, contact Crestron's True
Blue Support at 1-888-CRESTRON [1-888-273-7876] or, for assistance within a particular geographic
region, refer to the listing of Crestron world wide offices at www.crestron.com/offices.
To post a question about Crestron products, log onto Crestron's Online Help at
www.crestron.com/onlinehelp. First-time users must establish a user account to fully benefit from all
available features.
Future Updates
As Crestron improves functions, adds new features, and extends the capabilities of the GLPPA-KP units,
additional information may be made available as manual updates. These updates are solely electronic
and serve as intermediary supplements prior to the release of a complete technical documentation
revision.
Check the Crestron Web site periodically for manual update availability and its relevance. Updates are
identified as an “Addendum” in the Download column.
This product is Listed to applicable
UL Standards and requirements by
Underwriters Laboratories Inc.
SPECIFICATION
DETAILS
GLPPA-KP Specifications
Environmental
Temperature
32º F to 113º F (0º C to 45º C)
Humidity
10% to 90% RH (non-condensing)
Power Requirements
1 watt (0.05 amps @ 24 volts dc) supplied by GLPP
over proprietary 2-wire bus
Dimensions
Height
4 1/8 in (105 mm)
Width
1 3/4 in (45 mm)
Depth
1 13/16 in (46 mm)
Weight
4 oz (50 g)
Enclosure
Injection molded plastic, one gang mountable in a
standard electrical box, requires decorator style
faceplate (not supplied)
GLPPA-KP Dimensions
1 3/4 in
(45 mm)
1 13/16 in
(46 mm)
4 1/8 in
(105 mm)
INSTALLATION
Wiring
1. Using new or pre-existing wiring, connect the two non-polarized white wires with black
stripes from the GLPP-DIM or GLPP-SW to the two wires on the keypad.
2. If a second or third GLPPA-KP is being used in the room, wire them in parallel.
Wiring the GLPPA-KP
GLPP
Primary GLPPA-KP
Secondary GLPPA-KP
(Optional)
White/Black
White/Black