ADVANCED CONFIGURATION
2.
Click
Advanced Setup
to open the Common UNIX Printing System (CUPS) page. Use this link for advanced
printing configuration and job control.
Updating Software
Updating FaxFinder Software
To administer FaxFinder, the browser accesses the FaxFinder server through HTTPS (default port is TCP 443). When
you press Update to update firmware, the browser switches to HTTP port 80 to upload the new firmware file. The
browser then switches back to HTTPS.
The update process takes at least six minutes. Do not power off the FaxFinder during the update.
■
While the software is uploading, the browser shows Updating Please Wait and the FaxFinder's Status
LED flashes on/off normally.
■
When the browser switches back to HTTPS, the browser shows Rebooting Please Wait and the Status
LED is solid for about minute and then flashes normally.
■
When the process completes, the browser shows the login page.
To check for updates:
1.
Click
System Configuration > Software Update
.
2.
Click
Default
to ensure the Update Source field is set for the factory URL.
3.
Click
Check for Updates.
FaxFinder checks the designated site for a newer software version. If an update
is available, an Upgrade button and README link appear.
4.
Click
Upgrade
to download and install the update. Click
Yes
to upgrade and reboot automatically. Click
Cancel
if you do not want to update at this time. The update process takes several minutes. Click
README
to view information about the new version.
Warning:
Do not power off FaxFinder during the update process.
Note:
During the upgrade, the HTTPS port (TCP 443 by default) and TCP port 80 needs to be open to the
FaxFinder if there is a firewall or other security software blocking these ports.
The upgrade occasionally takes longer than expected. This may cause the browser to show a timeout when the
process tries to display the login screen. If this occurs, wait approximately one minute and then refresh your
browser.
Current Version
- Displays the software version currently installed.
Upgrading FaxFinder License
If you purchase additional T.38 ports to upgrade FaxFinder 240-IP, enter the license keys through the Software
Update page. Instructions for this process and the upgrade code are included with the License Upgrade Kit.
Field
Description
Current Channels
Displays the number of channels currently installed. Maximum is 8.
Hardware ID
Displays the Hardware ID of the FaxFinder. You will need this to generate the license
key.
Current License Key
Displays the license key currently in use on your FaxFinder.
New License Key
If you purchase a new License Upgrade Kit, follow the steps from the kit to generate
a new license key and enter it in this field.
56
FaxFinder
®
Fax Server FF240-IP Administrator Guide