MultiScree
∂
Channel
Indicates that
the screen is
a link
Sequence
Selector
[f]
[g]
[h]
1.
2.
3.
[i]
1.
Select the name of the sequence that you want to link to from the Sequence
Selector. Note that you will be unable to link to any sequence which already
contains a link back to the current sequence.
If you want the sequence to play more than one time before returning to the
initial sequence, enter the required number of repeats into the
Play Times
box.
If you only want the linked sequence to be activated during a certain daily
time range then do the following :-
First click the checkbox to the right of the
Start Time
box so that it
changes to a green tick. The grey time boxes will turn white, allowing
the times to be edited.
Set the
Start Time
and
End Time
for the daily time range you require.
To do this, click on the hours, minutes or seconds value that you wish
to change. Then there are several ways to change the value. You can
type a new number on the keyboard. Or you can increase or decrease
the current value by one by either pressing the up or down arrow keys
on the keyboard or by clicking on the up and down arrow icons at the
right side of the entry box.
The linked sequence will now only be started between these specified
times each day.
If you only want the linked sequence to be activated during a specified
range of dates then do the following :-
First click the checkbox next to the
Start Date
or the
Stop Date
so that
it changes to a green tick. The grey date box will turn white, allowing
the dates to be edited.
65
