MultiScree
∂
Channel
To add an analogue clock to a screen :-
[a]
Click the
Analogue Clock
Checkbox.
[b]
The colours of the clock hands can be altered. Click the box labelled
Hour/Min Hands Colour
. A colour selection palette will appear. Click the
colour you wish to use, then click OK.
[c]
The colour of the seconds hand can also be changed. Click the box labelled
Seconds Hand Colour
, and select the colour you wish to use.
[d]
There are twelve hour marks around the clock. The colour of these marks is
changed by clicking the box labelled
Marks Colour
. The clock is not
numbered - if you need a clock with numbers, there are graphics available
on the Production Unit with numbers or roman numerals in the correct
positions.
[e]
If you decide you don't want to use the marks at all, click the
Use Clock
Marks
checkbox. If the box contains a green tick, marks will be used; if it
contains a red cross, the marks will not be used. You should deselect this
option if using a graphic that already contains marks.
[f]
The current date can be displayed in the bottom right corner of the screen. If
you wish to display the date, click the
Display Date
checkbox.
[g]
The colour of the date displayed can be changed. Click the box labelled
Date Colour
to change it.
[h]
A small preview is displayed in the lower right part of the screen. For a full
screen preview, click the
Preview
button.
53
