24
Controlling Relays
:
To change the state of a relay or all relays at once, select a relay and click its respective “Turn On” or “Turn Off” but-
ton. The user may also select the option to reset the respective relay by selecting a reset time and clicking the “Reset”
button.
In the following screen shots, Relay 1 is used as an example. All subsequent relays will act in the same manner. When
turning On Relay 1, the user is prompted with a message asking if they want to perform the action.
Click “Turn On” and the relay will turn on. If Relay1 was previously on, it will remain on. After clicking “Turn On”,
the indicator next to Relay 1 will display in Green. The Summary page will also display a Green indicator. Addition-
ally, the LED for Relay 1 will also illuminate on the back panel of the unit.
