User Manual
102
To Output Arbitrary Signals
The menu items of Arbitrary waveform are: Frequency/Period, Start Phase,
Amplitude/High Level, Offset/Low Level, New, File Browse, Built-in. You can operate
the menu by using the menu selection buttons on the right.
To set the Frequency/Period,
Start Phase, Amplitude/High Level, Offset/Low Level, please
refer to
on page 99.
The Arbitrary signal consists of two types: the user-definable waveform and the system
built-in waveform.
Create a New Waveform
(1)
Enter the operation menu:
Push
(single-channel) or
(dual-channel)
button. Select
Arb
in the bottom menu, select
Others
in the right menu, and select
New
.
(2)
Set the number of waveform points:
Select
Points
in the right menu, turn the
M
rotary control to change the value, or use the input keyboard (push the M rotary
control to show it) to input the value and choose the unit.
X1
,
X1000
,
Xle6
,
Xle9
in
the keyboard respectively represent 1, 1000, 1000000, 1000000000. The waveform
points range is 2 - 8192.
(3)
Set the interpolation:
Select
Intrpl
in the right menu, choose between
On
/
Off
. If
you choose
On
, the points will be connected with beelines; otherwise, the voltages
between two consecutive points will not change, and the waveform looks like a
step-up one.
(4)
Edit the waveform points
: Select
Edit Points
in the right menu.
Select
Point
, input the number of the point to be edited.
Select
Voltage
, input the voltage for the current point.
Repeat the step above, set all the points to your needs.
Select
Save
, enter the file system.
If you want to save the waveform to internal memory, select
Memory
in the right
menu as
Internal
. Turn the
M
rotary control to select a file from USER0 through
USER31. Select
Save
in the right menu.
File size
Last modification time
Waveform graph
Содержание MP720021
