8
9
Quick Start Guide
Quick Start Guide
2� Connect to Power
Connect the 12V+ and GND pins to the 12V
auxiliary output on the alarm panel.
If there is no 12V auxiliary power on the
alarm panel greater than 300mA, connect
to a MCPS12 power supply (available
VHSDUDWHO\RUDÀ[HG9GFSRZHUVXSSO\
(>300mA).
3� Connect to Panel
Connect the “PANEL” connection on the
NTD to the “PSTN” connection on the alarm
panel using a 4-wire RJ12 cable.
Concept panels require a 6-wire RJ12
cable available separately from your
Multicom supplier�
