31
Panel Programming Methods
30
Panel Programming Methods
Panel Programming Methods
The following section gives an overview of the
programming method.
DTMF using Phone Handset/Butt
2QFHFRQQHFWHGWRWKHQHWZRUNWKH17'
can also be programmed remotely by
either your monitoring centre or from the
Suretek National Operations Centre�
1� Connect the Phone butt
to the “Panel”
socket. You will hear a dial tone.
2� To enter Program Mode
press the * key. You
will hear a busy tone. Enter the default
Program Access Code (
1345
) followed by
#
. When a successful code is entered you
will hear a dial tone. You are now in the
program mode.
eg. *1345#.
See Option
40 to change the Program Access Code.
3� To send a command
, follow the
Programming Options table, using the DTMF
row as a guide. Commands with PSTN/DTMF
are sent using the template:
*ADDRESS
SETTING
#
eg. *01ABCD#
4. The Multicom will reply with a
dial tone
if
your option was
updated successfully�
The
Multicom will reply with a
congested/busy
tone
if an
error
was encountered.
5. To exit program mode press ##. Your NTD
will also automatically exit program mode
DIWHUÀYHPLQXWHVRILQDFWLYLW\
