MULTICOM NTD, Руководство по установке

Страница: 14 / 31

27 Pairing the Multicom Inteliswitch 26 Hardware Diagram Descriptions
16) Logo LEDs (LED 1-5) The Logo LED’s act as
an indicator during initial connection to a
network. This may be used to diagnose any
networking issues you may have.
LED1 – Ethernet interface hardware
initialised ‘ok’
LED2 – Cable detected and
synchronised at 10/100
LED3 – ,3DGGUHVVKDVFRQÀJXUHGD
connection on the local network to a
network device (static or DHCP)
LED4 – UDP socket open
LED5 – UDP response received!
LEDSCROLL – Successful Poll and
response
Pairing the Multicom Inteliswitch
The following describes how to pair your panel to
an Inteliswitch.
The Inteliswitch included with your
NTD purchase is paired with your NTD
device out of the box� This guide is only
necessary for adding Inteliswitch devices
to your NTD�
1. Plug the Multicom
Inteliswitch into
a wall outlet and
turn on the power