MULTI MEASURING INSTRUMENTS MCL-800D+, Инструкция по эксплуатации

Страница: 7 / 16

46 138
237
(1)
(4)
(3)
(2)
(8)
(9)
(5)
(6)
(7)
(10)
3. NAME OF EACH PART AND HOW IT FUNCTIONS
3-1 Tester Body
(1) Clamp-type ZCT Clamp-type current detection sensor.
(2) Power button To turn the power ON / OFF.
(3) Filter button To turn the filter function ON /OFF.
(4) Range button To switch the measurement range.
Each time the button is pressed, the range setting changes in
the order of AUTO → 20 mA → 200 mA → 2 A → 20 A → 200 A
→ 1000 A → AUTO.
(5) Data Hold MAX Hold
button
To turn the data hold function and MAX hold function ON / OFF.
In the manual range, each time the button is pressed, the hold
mode changes in the order of data hold, MAX hold, and release
from hold.
In the auto range, the MAX hold function does not work. Each
time the button is pressed, the hold mode is alternatively turned
ON / OFF.
(6) Bluetooth button To perform pairing with this instrument and the dedicated
application "Multi-Tracer".
This button is also used to send measurements to the dedicated
application "Multi-Tracer".
(Only applicable with MCL-800DX and MCL-800DXR)
(7) Open / close lever To open and close the clamp type ZCT. Push it in to open the clamp.
(8) LCD To display measurements, units, symbols, and battery status.
(9) Hand strap To prevent dropping the instrument down.
(10) Battery cover To cover the battery case. Remove the screw and the battery
cover when you replace the batteries.
- 6 -