MULTI MEASURING INSTRUMENTS MCL-800D+, Инструкция по эксплуатации

Страница: 12 / 16

5-3 Auxiliary function for measurement
Manual range
Each time the Range button is pressed, the range setting changes in
the order of
AUTO → 20 mA → 200 mA → 2 A → 20 A → 200 A → 1000 A → AUTO.
After the range is switched, the set range is displayed for approximately
1 second.
* Right after the power is turned ON the auto range is set.
Data hold
Press the Data Hold MAX Hold button once.
The "DH" mark lights up and the measured value when the button is
pressed is held.
Each time the button is pressed, the function changes as follows.
Auto range: Data Hold
→
Cancel
→
Data Hold
→
.....
Manual range: Data Hold → MAX Hold → Cancel → Data Hold → .....
MAX hold (* Manual range only)
Press the Range button to set the manual range.
Press the Data Hold MAX Hold button twice.
The "MAX" mark lights up and the maximum value is updated at each
sampling from when the button is pressed.
Press the Data Hold MAX Hold button
again to cancel the MAX Hold
function.
Filter
Press the Filter button once.
The "FL" mark lights up and the measured value with the high frequency
suppressed is displayed.
Press the button again to cancel.
(Cut-off frequency: 150 Hz)
Bluetooth communication
Press the Bluetooth button once.
The mark flashes on the instrument display.
When the mark flashes, try to be paired with the dedicated application
"Multi-Tracer".
When pairing is made successfully, the mark changes from flashing to lit.
While they are paired, each time is pressed, the measured value is sent
to the dedicated application "Multi-Tracer".
(Only applicable with MCL-800DX and MCL-800DXR)
- 11 -