Muller Elektronik SLURRY-Controller 3.0, Инструкция по установке и эксплуатации

Страница: 4 / 62

Table of contents
4 V4.20191001 30322453-02-EN
6 Operating job computer on the field 26
6.1 Controlling the application 26
6.1.1 Setting target rate 26
6.1.2 Starting and stopping the application 26
6.1.3 Opening and closing the application valve 28
6.1.4 Adjusting the target rate during operation 28
6.1.5 Operating section valves 29
6.1.6 Spreading the slurry evenly across the working width 30
6.1.7 Operating the drop stop 31
6.2 Filling the slurry tanker 32
6.2.1 Moving the filling arms 33
6.2.2 Opening and closing the valves 34
6.2.3 Increasing the filling speed 35
6.2.4 Chopping up foreign objects in the slurry 36
6.3 Operating the mounted implement 36
6.3.1 Folding the booms of a mounted implement 36
6.3.2 Adjusting the lower link position 37
6.4 Adjusting the chassis 38
6.4.1 Adjusting the drawbar position 38
6.5 Switching the lighting on and off 39
6.6 Viewing the assignment of the joystick 39
6.7 Documenting work results 40
6.7.1 Trip counter 40
6.7.2 Customer-specific total counter 41
6.7.3 Implement counter 43
7 Configuring the job computer for work 44
7.1 Entering the geometry 44
7.1.1 “Min. working speed” parameter 45
7.1.2 “Delay - Sequence” parameter 45
7.1.3 “Delay on start” parameter 45
7.1.4 “Delay on stop” parameter 45
7.2 Selecting and configuring the speed source 45
7.2.1 Using the speed signal from the tractor 45
7.2.2 Calibrating the speed sensor with the 100m method 46
7.2.3 Entering the simulated speed 46
7.3 Calibrating the flow meter 47
7.3.1 “Correction Factor” parameter 48
7.3.2 “Flow Meter Impulses” parameter 48
7.4 Configuring the fill level sensor 48
7.5 Configuring sections 49
7.6 Configuring the mounted implement 50
7.6.1 “Mounted Implement” parameter 50
7.6.2 “Number of Sections” parameter 50
7.6.3 “Working Width” parameter 50
7.6.4 “Fold/Unfold” parameter 51