Muller Elektronik SLURRY-Controller 3.0, Инструкция по установке и эксплуатации

Страница: 28 / 62

6
Operating job computer on the field
Controlling the application
28 V4.20191001 30322453-02-EN
▪ Adjusting the target rate during operation [
➙
28]
▪ Operating section valves [
➙
29]
▪ Spreading the slurry evenly across the working width [
➙
30]
▪ Operating the drop stop [
➙
31]
Opening and closing the application valve
You can open and close the application valve to start or stop the application.
This is how you reach the screen with this function:
( )
Use the following function keys to operate the function:
Function icon Meaning
Opens the application valve.
Closes the application valve.
The following icons may appear on the work screen:
Icon Meaning
The application valve is open.
The application valve is closed.
Adjusting the target rate during operation
You can amend the target rate while working.
This is how you reach the screen with this function:
> ( )
Use the following function keys to operate the function:
Function icon Meaning
Restores the target rate back to 100%.
Stops or starts the application.
6.1.3
Path
Controls
Icons
6.1.4
Path
Controls